Support Overview

Tutorials

Client API Usage Examples

Upgrade Information

FAQ

New Release History

You are here:   Visualware >   MyConnection Server >   Support >   Online Manual Overview >   IPTV Test Configuration

IPTV Test Configuration

The test configuration options are available when creating a custom test.

Video Settings

There are three parameters needed to define the payload the

Codec: This selection defines the codec for the test. Choose 'other' to define a non standard codec or to increase a standard codec for a higher capacity.

Resolution: This selection defines the video resolution required for the test. Choose 'other' to define a non standard resolution.

Frames Per Second: This selection defines the frame rate required for the test. Choose 'custom' to define a user selected frame rate.

Custom Frame Rate: Customize the frame rate for simulation

Run test for: This parameter defines the test duration in seconds, the maximum allowed is 60 seconds.

Audio Settings

There are two parameters needed to define the payload the audio content to be combined with the video test.

Audio type: Select from the audio choices listed, namely 'No Audio' to exclude audio, 'mono' to include a single audio stream and 'stereo' to include both a left and right channel audio stream.

Codec: This selection defines the codec for the test. Choose 'other' to define a non standard codec or to increase a standard codec for a higher capacity.

Advanced Settings

Packet Size for Video Stream: The parameter changes the actual packet size used for the video test. This will affect the number of packets generated per second to accommodate the video content defined above.

Omit time: This parameter allows an initial portion of the test to be omitted from the test results. This is normally used for networks that have a TCP ramp delay

Number of round trip time tests to perform after the IPTV test is done: Specify the number of round trip times you'd like the IPTV engine to perform once the test has finised.

Port number for RTT tests: Set the port number required to perform the round trip time on. Leave blank to use IPTV server/port

 

MyConnection Server

Home
Online Testing Portal
Download
Purchase
Resources
Support

Visualware Products

VisualRoute
eMailTrackerPro
Visual IP Trace

   

© Visualware Inc. 2017 - All Rights Reserved