Part 2:
Step 1: Run the AccessCTcfg.exe configuration program that came
with the box. This will bring up a dialog like the one shown below in fig 1:
Fig 1
Step 2: To locate and access the AccessCT you have just connected you can
either:
|
1) Manually type the IP address of the device into the "board IP
address (1)" edit
field. (default: 192.168.0.98)
2) Click the search button (3) to locate it automatically.
|
Step 3: Once the AccessCT device has been located click the connect button
(2) to
connect. The status field will show 'connected'.
Step 4: Click the network configuration tab in the image above to configure the network settings.
Notes: If you have more than one AccessCT Device on the network
then clicking the search button will locate all the local devices, simply use
the drop list box to select the AccessCT device required.
If you wish to connect to an AccessCT Device that is on another subnet. You
can type the IP address and click the connect button directly. |
| 
Introduction
